Showing posts with label Fur. Show all posts
Showing posts with label Fur. Show all posts
Thursday, 12 December 2013
Fur Pelt Sculpt - Hobby 101
Using my fur test knowledge I applied the greenstuff to the appropriate area on the model, which in this case was over the shoulders and hanging down one side. I then used the back edge of my hobby knife to 'pull' down lines in the greenstuff to create the fur effect, starting from the top working my way down, remembering to change direction of the strokes to avoid a pattern forming. Allow to dry and paint.
The backpack is actually obscuring most of the fur pelt which was unintentional but it turned out very nice anyway.
Give this a try, it is actually very easy and you cant really mess it up.
Vitor
Saturday, 16 November 2013
Hobby 101 Sculpting Fur with Greenstuff Test
With my new found enthusiasm from reading the Horus Heresy
Books I wanted to paint up a Luna Wolf.
As part of this plan I wanted to add wolf fur to the model but didn’t want to use bits from the Space Wolves range although they are pretty cool and will probably be easier.
I wanted to try out my hand at sculpting fur from greenstuff. I did lots of research on various techniques and then set about my test patch.
To start with I took my surface, plastic, which would not stick too much to the greenstuff but allow me to work. Next roll out a small piece of greenstuff and flatten it into the desired shape you want, in this case it is just a test so flat and square. In my research before, I found people used sculpting tools like the picture below to create the fur effect.
I found it a bit to thick so I used the back of my hobby knife.
What you do is take your chosen sculpting tool and work from the bottom across and drag the edge of the tool downwards in short 'pulling down' strokes. Try and vary the length and direction/angle of each stroke to create a natural look. Once you have done the bottom row move to the next row above and repeat ensuring you overlap the bottom layer slightly.
As part of this plan I wanted to add wolf fur to the model but didn’t want to use bits from the Space Wolves range although they are pretty cool and will probably be easier.
I wanted to try out my hand at sculpting fur from greenstuff. I did lots of research on various techniques and then set about my test patch.
To start with I took my surface, plastic, which would not stick too much to the greenstuff but allow me to work. Next roll out a small piece of greenstuff and flatten it into the desired shape you want, in this case it is just a test so flat and square. In my research before, I found people used sculpting tools like the picture below to create the fur effect.
I found it a bit to thick so I used the back of my hobby knife.
What you do is take your chosen sculpting tool and work from the bottom across and drag the edge of the tool downwards in short 'pulling down' strokes. Try and vary the length and direction/angle of each stroke to create a natural look. Once you have done the bottom row move to the next row above and repeat ensuring you overlap the bottom layer slightly.
To enhance the natural look go back afterwards and use a ‘pushing up’ action to create some depth and a
different texture to areas for more interest and a natural look.
The idea of the test patch is just that, to try out what
works for you so don't worry about messing it up that the whole point.
Vitor
Subscribe to:
Posts (Atom)