Flames of War - V1 Flying Bomb - Showcase

Here is my V1 set up in a terrain piece I made earlier, the field with crops using herbs.

Some other good news, my hobby stuff has arrived from overseas and I will be operational again in a few days!!

Vitor

Flames of War - V1 Flying Bomb - Finished

Here it is!! All done.

Vitor

Flames of War - V1 Flying Bomb - WIP

 

Now onto the actual flying bomb part. After painting it Field Grey I carefully applied a black/brown mix wash into the  joints.

I then painted a slightly darker version of Field Grey over the top part as a base for the Camouflage, careful to leave the wash showing in the joints.

I mixed in a Dark Green to the Field Grey mix and applied a further coat to the top.

I then cleaned up the bottom with the original Field Grey base again careful to leave the wash showing in the joints.
 

Next up the finished product.

As mentioned previously I am eaking out my saved posts till I can get my hobby area up and running again.

Vitor

Flames of War - V1 Flying Bomb

Next on my list to paint was my V1 Flying Bomb with Launch Pad. I started out with a black primer for both pieces.

Then I used Field Grey for the base coat of the V1 and a equal mix of my custom Middlestone and Chocolate Brown for the Launch Ramp.

I painted the Launch ramp next with a coat of Middlestone.

I then applied a Dark Brown Wash.

Using Middlestone again I cleaned up the Ramp leaving the wash in the recesses.

Next I painted the camouflage. The base brown camouflage was a 50/50 mix of Middlestone and Chocolate Brown and a 70/30 Chocolate Brown and Middlestone mix for the center part of the camouflage. The green was a 50/50 mix of Reflective Green and Middlestone as a base then a 70/30 mix of Reflective Green and Middlestone for the center of the camouflage.

Last was to finish with a drybrush of Bone or Ivory (not shown yet).

Next post, painting the V1.

Vitor